Check all article List - Best Sewing Machine | Review of All Sewing Machine | Sewing Tips | Textile | Accessories | How to
This work bag has finished measurements of 11x27x30 cm.
It’s a very simple and beautiful creative sewing project to make. It doesn’t present many difficulties and even sewing beginners can sew it without problems.
The work bag has two large internal pockets, a drawstring closure and handles.
For the closure, 2 ribbons are made with the same fabric used for the lining or, alternatively, you can use bag ribbons found in haberdashery.
The bag involves the use of two fabrics in combination with each other, for the inside and the outside.
Materials and Tools
- 2 pieces A of fabric 1 for the outside 40 x 34 cm
- 2 pcs of non-woven fabric 40 x 34 cm
- 2 pcs B of fabric 2 for the lining measuring 40 x 34 cm
- 2 pcs C of fabric 1 for the tubular 38 x 10 cm
- 2 pcs D of fabric 2 for the pockets measuring 32 x 25 cm
- 2 pcs And of fabric 2 for the handles 40 x 14 cm (finished they are 3.5 cm high)
- 2 pcs F of fabric 2 for the laces 85 x 10 cm (finished they are 2.5 cm high)
- 1 square in cardboard 5.5 cm
- plate handmade in wood
Sew the outer sack of the bag
Cut two rectangles A from fabric 1 chosen for the outside and iron a heat-adhesive canvas on the back to make the outside of the bag more rigid.
Place the two panels A right sides together and sew on 3 sides.
The base of the bag is the one that measures 40 cm.
Iron the seams open.
Draw and cut the corners at the base with a 5.5 cm square and sew the corners by pressing them.
Sew the drawstring
Take the two rectangles C and iron a small 1 cm fold on the short sides.
Make a seam on the freshly ironed folds.
Fold the rectangles in half on the right side and iron.
Then set aside.
Handles
For the handles, take the 2 rectangles of fabric and fold each piece into 4 parts.
Iron, on an internal strip, a 3.5 cm high thermoadhesive canvas.
The finished handle is 3.5cm tall.
Fold into 4 parts and sew on the 2 long sides.
Sew the handles and drawstring to the bag
Place the outer bag of the bag right side up and mark 10cm from the outer edge, to the right and left.
Place the handles here.
Once the handles have been pinned, place the folded rectangle of the tube leaving 1 cm of space on the right and left.
Sew taking the two added parts together.
ATTENTION: Sew with a seam allowance of less than 1 cm.
Repeat everything on the second side.
Prepare the internal pockets
With the 2 rectangles D of fabric 2 make 2 pockets to apply to the lining panels.
Follow the tutorial How to sew a perfect inside pocket.
Each pocket must be positioned 8 cm from the top edge of the panel.
Sew on 3 sides.
Prepare the bag lining
Take the two rectangles B of chosen fabric 2 for the lining, to which we have sewn the internal pockets.
Sew on 3 sides, but leave an opening of approximately 10-12 cm at the bottom.
Draw and cut the corners with the 5.5 cm square.
Sew each corner of the base as done for the outer bag part.
Assemble the bag
Once the corners of the base of the lining bag have also been sewn, insert the bag on the outside inside out into the lining bag, so that the fabrics of the two bags touch right sides together.
Pin along the top edge and sew.
From the bottom opening, turn the bag right side out. Close the opening either by hand, with a blind stitch, or by machine.
Iron well and sew along the edge of the bag, with a topstitch on the right side.
Sew the closing laces
The laces have a finished height of 2.5cm.
Take the 2 rectangles F and iron a 1 cm fold on the short sides.
Iron each rectangle into 4 parts. Sew along the perimeter of the lace, thus also welding the open sides.
Using a ribbon loop, insert the 2 laces into the drawstring of the bag.
Check all article List - Best Sewing Machine | Review of All Sewing Machine | Sewing Tips | Textile | Accessories | How to